Main Features:
● Five-step installation, assembly takes only 15 minutes
● Full metal body, accurate and stable printing
● 260 x 260 x 270mm large size printing
● Automatic feeding and unloading function, easy to solve by feeding and refueling
● Z-axis dual motor, Y-axis dual-axis design, solid and stable structure, more precise printing accuracy
● Adjustable Y-axis belt design, belt tension can be adjusted freely to improve print quality
● Special pulley + profile design, the pulley and the profile are perfectly matched, and the printing precision is higher
● Aluminum substrate hotbed , the printing is flat and not warped, easy to take out the model

General |
|
|
Dimensions and Weight
|
Product weight: 6.8000 kg |
|
Package Contents
|
Packing Contents: 1 x Flat Shovel, 1 x Power Cord, 1 x Diagonal Pliers, 1 x Pass Pin, 1 x Wire, 1 x Hotbed Sticker, 1 x Tools Kit, 1 x Screws Bag, 1 x Belt, 1 x TF Card Bag, 1 x Nozzle, 1 x Cable Tie, 1 x Y Motor Component, 1 x Z Motor Component, 4 x 2020 Aluminum Gantry, 2 x Sheet Metal Component, 1 x Print Head Component, 1 x Rod, 1 x Rack, 1 x Extruder Component |
FAQ
Why not extruding enough plastic?
1.Incorrect filament diameter;
2.Increase the extrusion multiplier. The solution to under-extrusion (not extruding enough plastic)
Why there are holes and gaps in the top layers?
1. Not enough top solid layers;
2. Infill percentage is too low;
3. Under extrusion.
The detail you can read this post:
Solutions to holes and gaps on the top surface during 3D printing